Mesh Type Veneer Dryer is the main equipment for plywood production, it's mainly used to dry face veneer.
The machine features are listed as below:
1. This veneer dryer machine adopts a top centrifugal fan, which brings much air volume and good stability.
2. This Veneer Dryer is equipped with steel aluminum composite radiator. The sprayed airflow can work on the veneer surface quickly, uniformly and effectively,so it could help reach the needed final veneer moisture content.
3. The heating fans are installed on both sides of the dryer, so that the moisture content on both sides of the dried veneer is basically the same.
We can customize the dryer as per your required drying capacity, working width, layers and heating length, to meet your production requirement.
Basic Specifications
|
Model |
BG183 |
|
Working width |
2800mm |
|
Working layers |
2/3/4 layers |
|
Quantity of heating sections |
5~15 sections |
|
Length of heating section |
2000mm×(5~15) |
|
Length of cooling section |
2000mm |
|
Heating motor |
7.5kw×(5~15) |
|
Cooling motor |
2.2kw |
|
Air pressure |
0.5Mpa |
|
Veneer transportation speed |
2~30m/min |
|
Heating medium |
Thermal oil or Hot Steam |
|
Drying temperature |
150~180℃ |
|
Veneer density |
~590 ㎏/m³ |
|
Veneer thickness |
0.5~1.5mm |
|
Veneer initial moisture content |
60% |
|
Veneer final moisture content |
10±2 % |
|
Drying capacity |
1~4 m³/h |
Hot Tags: mesh type veneer dryer, China mesh type veneer dryer manufacturers, factory, core veneer dryer machine
